Description
Understanding Reverse Osmosis
Reverse osmosis filtration is the purest investment for households and/ or industries. Reverse osmosis (or RO) is a water filtration technique used to remove inorganic minerals from water using a semi permeable membrane. In RO, osmotic pressure is overcome by an applied pressure forcing bacteria, nitrates, sulphates and other contaminants to remain on the pressurized side of the membrane. Additionally, the carbon filter in an RO system helps to trap chloramines and chlorine. As a result, pure clean water is allowed to flow from the other side of the filter.
PROCESS DESCRIPTION Filtration:
The raw well water available at the suction of raw water pump in RO hall, shall be introduced into sand filter through raw water pump. The sand filter shall remove the suspended solids up to 20 microns, present in well water. Sand filter is back washed once a day and at first startup of the day to refresh, the media removing retained suspended particles.
The filtered water then shall pass through Activated Carbon filter for the removal of organics & free chlorine if any. Activated carbon also improves odor & removes color of water adsorbing contamination on its surface. The activated carbon is again refreshed through backwash of the filter as stated above for sand filter.
Reverse Osmosis System:
Reverse osmosis (RO) membranes are used to reduce the dissolved solids present in the feed water. The product received from RO is called permeate. The concentrate or reject generated from RO system shall be high in TDS and shall be drained locally.
Cleaning in Place (CIP):
The RO membranes are periodically cleaned to remove sparingly soluble salts on the surface of membranes using the process called CIP. The skid mounted tank shall be supplied for preparation of chemical solution for cleaning of RO membranes. The piping arrangement shall be made in a way that the raw water pump & cartridge filter at RO inlet shall be used in CIP circuit.
System Operation:
The RO system shall be fully automatic with levels of the raw water & product water tanks as well as low & high pressure tripping provided across high pressure RO feed pump.
TECHNICAL SPECIFICATIONS & SCOPE OF SUPPLY:
The technical specifications of major equipment & materials in scope of supply being listed below;
Raw Water Pump:
The client shall supply raw water from overhead tank up to the suction of raw water pump at battery limit.
Quantity : 01 Nos.
Capacity : 4 m3/h
Discharge pressure : 6.0 bar
Type : vertical/horizontal, centrifugal
Make : CNP / Equivalent
Sand Filters:
Silica Sand filled in SS/FRP vessel with top mounted Manual valve. It removes the silt, dust, rust and invisible suspended particles from raw water.
Quantity : 01 Nos.
Flow Rate : 1000 L/H
Model of Vessel : 13″x 54″
Material of Vessel : FRP (Fiber Reinforced Plastic)
Design Pressure : 150 psi
Make of Vessel : PWT
Operation : Manual
Type of control valve : top Mounted
Make of Valve : Imported
Filling Media : Gravel, Sand etc.
Low pressure : UPVC
High Pressure : UPVC
Made : Imported
SAND QTY : 100 KG
VALVE SIZE : 1”
Carbon Filter:
Activated Carbon filled in FRP vessel with top mounted Manual valve. It removes the bad small bad Taste inorganic chemical And Chorine from raw water.
Quantity : 01 Nos.
Flow Rate : 1000 L/H
Model of Vessel : 13″x 54″
Material of Vessel : FRP (Fiber Reinforced Plastic)
Design Pressure : 150 psi
Operation : Manual
Type of control valve : Top Mounted
Make of Valve : Imported
Filling Media : Activated Carbon
Piping : UPVC S/80
Made : Thailand
CARBON QTY : 50 KG
Valve size : 1”
Softener Filter Ion-Exchange Resin:
Function (The process ion-Exchange Occurs Through the resin beads. The Negative Charged Molecules, Calcium & Magnesium are attracted to the positive bound of the resin.)
Quantity : 01 No
Flow Rate : 1000 L/H
Pressure Drop : 3 to 4 psi
Min Working Pressure Bar : 1.3
Max Working Bar : 8.5
Test Pressure Bar : 10.5
Max Working Temp : 50 C
Size of Vessel : 150PCI 16″ x 65″ Material of Vessel SS/FRP (Fiber Reinforced Plastic)
Inlet & Outlet Size : 1″ Softener Media Ion-Exchange Resin
Media Resin Food Grade : 75 Ltr
Softener Valve : Manual
Softener control valve is been used to control back wash & Regeneration cycle for the Media filters & to keep water treatment system working at maximum performance at 24 hour. per the raw water quality & usage of water.
JUMBO SEDIMENT FILTER :
Jumbo sediment filter is a mainline filtration system, specially designed to filter sediment particles like silt, miner scale, dust, rust, sand etc, at a very high flow rate of up to 20 LPM with a filtration rating of 05 to 01 micron. It is the ideal remedy for all problems of water filtration for entire Houses, Hotels, Swimming pools, Laundries etc.
Quantity : 02 NO’s
Make : Taiwan
Maximum Flow Rate : 05 GPM
Maximum Pressure : 90 psi
Type of Cartridge : Polypropylene fiber
Dia of Cartridge : 2 ½” Length 20″
Inlet / Out Let : 1” Housing Dia 4″
Housing Material : Polypropylene
Replacement Cartridge Cartridges need replacement after 1 to 2 month.
High Pressure RO Feed Pump:
The high pressure RO feed pump used for pressurized supply of raw water into membranes for desired recovery of permeate water.
Quantity : 01 Nos.
Material : SS316
Capacity : 02 m3/h
Discharge pressure : 6~8 bar
Type : vertical, centrifugal
Make : CNP / Equivalent
Recovery : 60~70%
Raw Water Temperature : 25 ~ 35 o C
Raw Water type : Filtered, well water
RO Configuration : 5×5
Permeate TDS : <10 p.p.m
Reverse Osmosis Membranes
The Reverse Osmosis membranes are top quality hydronautices or Pall Brackish Water membranes. Thin film composite TFC, FDA approved, manufactured by Dow Chemicals or HYDRONAUTICE with 99.5 percent salt rejection.
Quantity : 01Pcs.
Model : 8040
Membrane Surface Area : 8″X 4″
Type of Membranes : Spiral wound
Material of membrane : TFC, PA
Membrane Housings:
Heavy-duty Reverse Osmosis pressure vessels/housings are made of FRP material, tested, and certified by “American Society of Mechanical Engineers” ASME.
Quantity : 01Nos.
Model : 8040
Pressure rating : 350 Psi
Elements per Vessel : 01 Nos.
Material of vessel : FRP
Reverse Osmosis Skid/Frame
The entire RO frame made of mild steel LESS STEEL, which provides a durable corrosion resistant surface easy to clean & maintain.
Pressure Gauges
Stainless steel liquid filled low and high pressure gauges with following specifications.
Quantity : 3
Dial Size : 2.5”
Material of gauges : SS316
Connection type : bottom or back
Online Flow meter:
Online flow meters for setting up recovery of the RO system installed on permeate & concentrate line.
Quantity : 02 Nos.
Type : Rota meters
Mounting type : panel mounted
Configuration : Round/Flat
Online TDS Monitor:
This instrument is online conductivity instrument, which monitors conductivity of permeate of RO.
Quantity : 01 Nos.
Location : permeate line
Range : 0~1000 µs/cm or 0~2000 µs/cm
Make : Imported
RO Configuration : 5×5
Permeate TDS : <10 ppm
Dozing pump For Anti Scaling & Minerals:
Qty : 04
Made : ITLAY
SIZE : 80 LTR
Tanks : 04